Tuesday, October 17, 2017


Well, everything is packed and ready to load into the vehicle as we head off to Reapercon 2017.

As usual, I will be doing classes, with a few new additions.  This time around I will be doing an oil painting class, and painting a historical vehicle too!  I will have a lot of my Bolt Action stuff in tow also, although I don't think there will be enough space to have my terrain.

Hopefully there will be more time this year to paint in the event space before and after the classes.  I like to do spot demos and other fun things, which might be more possible with only 1 class per day.

The other 2 classes I am doing will be the core of everything I do, and that is basing and Shaded Basecoat technique.  For those who won't be able to take those classes, will also have my USB drives filled with the painting videos.  You will be able to choose from any of the 53 available titles.  All you have to do is come by and ask.  As the videos load, we can discuss some of the finer points of what each 100 minute video covers.

We look forward to seeing everyone in just a few days!  I believe that this is one of the 25th anniversary figures that Reaper has made.  This one generously came along with a recent order of figures for the painting classes.  Thanks to all the folks at Reaper!

Monday, October 16, 2017

Working in the Shade

As most of you already know, I like to use a version of my Shaded Basecoat technique with the airbrush, that that this is done with the Badger Stynlrez primers.

In this case, I will be doing this on some French infantry from Warlord Games, one of the last units for the army.  Since they will have to match all the other previously painted figures, the colors used would be very simple.  The idea is only to establish where the lights and darks would be. 

The first Stynlrez primer was the dark brown Ebony.  All I am doing is covering the entire surface, setting up the next primer color.

I really like how this deep brown color works.  It is relatively neutral as far as being a warmer or cooler, but still have more interesting tone than gray.

Some black primer was sprayed near the bottom of the base pointing upwards, so that it would also hit the bottoms of the figures too.  This would be the darkest areas of shading.

You can see that even with this one addition, there are already some nice value gradations established.

Since I will be using my normal glazing techniques once the priming is complete, I only need to provide a hint of greenish brown.  This is the next layer, which is mixed with a little bit of the brown primer.

The image on the right shows one figure with the green primer and a little yellow primer added. By spraying it from above the figure, you can immediately get a sense of how the overall figure should be shaded.

It must be remembered that I want these colors to be a few shades lighter, because I am doing many glazes over the top of this primer set.  That's going to darken everything down significantly.

The final layer is a mix of the yellow with some white.  Not only is it important for getting the last highlights on the upper surfaces of the figures, but highlighting the base as well.  

This can really be seen with the kneeling figure on the left.

At this point, the unit is basically ready for the rest of the painting process.  I may use acrylics or oils at this stage, depending on what else is being painted at the same time.

The view from above shows off the base too.  If you want to get some of these excellent primers (these are the some ones you have seen me using on vehicles and even terrain), you can get them at webairbrushes.  If you use the discount code "wappellious", you get a 42% discount:

Sunday, October 15, 2017

The Barbarian

Ever since I painted my very first Norsgard figure, I knew that I had a new miniature line that I would enjoy very much.  The resin is very resilient, with a nice smooth finish and not brittle or hard.  While that makes them easier to assemble, it also makes for a very nice painting surface!

Other areas like the fur cloak and the weapons tend to be in nice shape too.  When those are more detailed, it means that I can paint some more interesting varieties of tones into things that would ordinarily look gray.  While it might look like gray right off the bat, there are plenty of greens, purples and blues as well.

It is important to include those tones, since they are all reflected in the colors that I used on the skin.  This helps to ties everything together.

You can check out more of those fantastic figures here:

If you are wondering about the size of the figure, he is on a 40mm base.

Friday, October 13, 2017

The Templar

I had some fun with this Templar Knight.  This was one of the first complex mounted figures that I used an airbrush for the shaded basecoat phase.

This meant that I could paint the whole thing more or less intact and fully assembled, which was more handy than I thought!  Usually there is the nasty ritual of trying to glue a fully painted rider onto a fully painted horse, which never seems to fit correctly, even when you have dry fit it a hundred times!

Then you end up making one of those green stuff 'saddles' to make sure the guy doesn't fall off, and you have to hope that you don't get glue and green stuff in places that you painted.

Better yet, you now have to get a brush with paint into areas that were never supposed to be exposed in the first place!

In any case, it also made it easier to keep the same flow of light and shadow having the figure on the horse the entire time,  There have been far too many times where I have painted shading or something elaborate in an area where it will never be seen, or where it does not make sense entirely once he is back on the horse.

As usual, I was working with a basic Badger Patriot 105, and using the Stynlrez primers.  All I am trying to do is get that preliminary shading, figuring out in advance (while priming at the same time!) so that I can get right into the final shading and mid tone work.

I also used some combinations of Mig Ammo mud on the base and the horse.  The first layers were a lighter tone, to represent the dried mud.  Subsequent layers were darker, to represent the fresh turned dirt/mud.  Then I added the foliage and some leaves cut with the Green Stuff World leaf cutters.

He's also here:

Thursday, October 12, 2017

Golden Hero

The more I work on miniatures (this is year 17), the more I turn to my original 2D art roots.  

This means that I seldom paint the color that "should" be there.  When you are painting in oils or watercolors, you don't search around for just the right red or green or blue, etc.  Instead, you create the "impression" of those colors.

Instead of painting 'gold', you paint all the reflections of the surrounding areas, with a suggestion of a bright yellow here and there.  This figure has lots of greens, blues, purples and reds as opposed to a bunch of different yellow tones.

I realize that this sounds very complicated and somewhat crazy, but it is actually a far easier way to achieve an effect, and you end up using a very small set of colors.  As I have mentioned before, I seldom use more than 6-7 colors on an army, much less an individual figure.

This is also how I can work on several different genres at the same time.  I don't need a 'clean' set of new colors for each figure... instead I utilize that one set of colors for everything, mixing where I need to.

Of course, beginning with the shaded basecoat technique helps a lot.  This provides that basic framework which my first layers of paint used to on my 2D art.  The idea was always to map out where the lights and darks should be as soon as possible, and then build around that.

These "golds" are made of oranges, greens mixed with tan, muted purples, dark blues, you name it.  This variety in tones also makes it far more interesting to look at, just as looking closely at a 2D painting reveals all the interesting brush strokes of colors that were used to make you believe you are looking at something which is three dimensional.

Wednesday, October 11, 2017

All Hail the King

I made this fun conversion for my Tomb Kings army, with the various elements designed to show the taint of Tzeentch.  The multi colored carrion bird had been one of the King's pet birds prior to this taint.

Here's the story of the army:

I scratch sculpted two constructs for the army as well:

This article discussed the planning of the display board:

This image was seen in many of the bases, figures and display board:

Here are some views of the army and the display board:

Here's a closer look at the moveable terrain pieces that I created for that upper level:

Tuesday, October 10, 2017

Have Club, will Travel

I am not sure who makes this figure (my guess has been Mierce), but it was an interesting one to work on.  With larger, open areas of exposed skin, I could try a few subtle color combos to make those places more interesting.  That meant including purples, blues, greens and so on alongside the warmer tans and peach tones.

While this was in effect a "limited palette" exercise, I used a full range of colors to make sure that some reddish colors were more or less saturated.  As I always say, contrast is not just light vs dark, or even opposite colors.  Temperature contrast and saturated vs grayed down colors also counts as contrast!

I think you can see in one of these images that the branch he is holding actually has a nest at the top, with eggs spilling out!  That was a hilarious touch, and there is even a bird sticking its head out of the branch.  Very cool!

Since I knew that I would be adding plenty of green foliage added to the base, I had to account for those colors while I was painting the figure.  You can see how the greens contrast against him, especially where the darker greens make the lighter skin tones stand out a bit more.